KEEP YOUR WINDOWS AND DOORS LOOKING AND OPERATING THEIR BEST FOR YEARS TO COME

Maintenance Guide

VTITE uPVC windows and doors require very little maintenance, however it is important to look after them regularly to retain their value and appearance.

UPVC Frames Cleaning

Whether upvc profiles are white or coloured, there is no need to use a special type of cleaner for basic cleaning requirements. Our window and door profiles can be cleaned using warm soapy water and a damp cloth. Make sure the cloth is clean and there are no stones or debris on the cloth which may cause scratching.

Any stubborn stains can be cleaned with uPVC cleaner. Please contact us for any further information on VTITE cleaning kits which are available.

It is extremely important that you do not use any cleaning products which may damage the surface of the profiles. This particularly applies to polish creams and compound paste which may contain solvents or thinners. Using these products can discolour foiled and white frames and damage the surface of the profile making it less resistant to weather exposure.

Glass Cleaning

For the best results use warm soapy water to remove any dirt or debris and once dry follow up with a simple household glass cleaner and a clean cloth. To remove all streaks you can use a squeegee working from top to bottom ensuring there are no drips. Any jewellery should be removed prior to cleaning to ensure the glass is not scratched.

Drainage Inspection

Your windows/doors will contain drainage slots, it is important that they are kept clear of blockages to ensure proper drainage. Please open your window or door and ensure the frame slots are kept clean. Remove any dirt or blockages and wipe the slot clean with a damp cloth.

Hardware Maintenance

Each element of your window or door requires maintenance to prolong life, this especially applies to hardware to ensure smooth operation for many years to come.

▪ Any moving components, where there are pivot points such as locks and hinges should be lubricated using a non-acidic mineral oil (e.g. oil for multi-purpose use and rust protection) at least once a year. All surfaces surrounding the mechanism should be surface cleaned with a damp cloth and kept free of any dirt or debris.

▪ Door cylinders should be lubricated using a small amount of PTFE based lubricant. This is applied to the key and inserted into the cylinder then turned a few times, inline with the normal locking function. The surface should be cleaned with a damp cloth.

▪ For window and door handles use soapy water and a damp cloth.

WINDOW HARDWARE MAINTENANCE

TILT AND TURN WINDOW ADJUSTMENT

Need more information

Get in touch

ph. 07 542 0699